Appendix B Server Configuration File Syntax
The DTD of the server configuration file is shown below:
<!-- -->
<!-- -->
<!-- -->
<!-- secsh-server.dtd -->
<!-- -->
<!-- Copyright (c) 2022 SSH Communications Security Corporation. -->
<!-- This software is protected by international copyright laws. -->
<!-- All rights reserved. -->
<!-- -->
<!-- Document type definition for the Tectia Server XML -->
<!-- configuration files. -->
<!-- -->
<!-- -->
<!-- Tunable parameters used in the policy. -->
<!-- Default connection action. -->
<!ENTITY default-connection-action "allow">
<!-- Default terminal action. -->
<!ENTITY default-terminal-action "allow">
<!-- Default subsystem action. -->
<!ENTITY default-subsystem-action "allow">
<!-- Default subsystem audit value. -->
<!ENTITY default-subsystem-audit "yes">
<!-- Default for allowing undefined blackboard entries by selectors. -->
<!ENTITY default-allow-undefined-value "no">
<!-- Default user-privileged value. -->
<!ENTITY default-user-privileged-value "yes">
<!-- Default user-password-change-needed value. -->
<!ENTITY default-user-password-change-needed-value "yes">
<!-- Reverse mapping is not required by default in
publickey authentication. -->
<!ENTITY default-auth-publickey-require-dns-match "no">
<!-- Default tunnel action. -->
<!ENTITY default-tunnel-action "allow">
<!-- Default command action. -->
<!ENTITY default-command-action "allow">
<!-- Default interactive command action. -->
<!ENTITY default-interactive-command-action "no">
<!-- Default rekey interval in seconds. -->
<!ENTITY default-rekey-interval-seconds "3600">
<!-- Default rekey interval in bytes (1GB). -->
<!ENTITY default-rekey-interval-bytes "1000000000">
<!-- Default login grace time in seconds. -->
<!ENTITY default-login-grace-time-seconds "600">
<!-- Default authentication action. -->
<!ENTITY default-authentication-action "allow">
<!-- Password authentication default failure delay in seconds. -->
<!ENTITY default-auth-password-failure-delay "2">
<!-- Password authentication default maximum tries. -->
<!ENTITY default-auth-password-max-tries "3">
<!-- Password cache is disabled by default -->
<!ENTITY default-password-cache "no">
<!-- DNS match not required by default in host-based authentication. -->
<!ENTITY default-auth-hostbased-require-dns-match "no">
<!-- Keyboard-interactive authentication default failure delay in seconds. -->
<!ENTITY default-auth-kbdint-failure-delay "2">
<!-- Keyboard-interactive authentication default maximum tries. -->
<!ENTITY default-auth-kbdint-max-tries "3">
<!-- Keyboard-interactive RADIUS server default port. -->
<!ENTITY default-radius-server-port "1812">
<!-- Keyboard-interactive RADIUS server default UDP recvfrom timeout. -->
<!ENTITY default-radius-server-timeout "10">
<!-- GSSAPI default ticket forwarding policy. -->
<!ENTITY default-gssapi-ticket-forwarding-policy "no">
<!-- gssapi default library values. -->
<!ENTITY default-gssapi-dll-path "/usr/lib/libgssapi_krb5.so,/usr/lib64/libgssapi_krb5.so,/usr/lib/libkrb5.so,/usr/lib/libgss.so,/usr/local/gss/gl/mech_krb5.so,/usr/local/lib/libgssapi_krb5.so,/usr/local/lib/libkrb5.so,/usr/kerberos/lib/libgssapi_krb5.so,/usr/kerberos/lib/libkrb5.so,/usr/lib/gss/libgssapi_krb5.so,/usr/kerberos/lib/libgssapi_krb5.so.2,/usr/lib/libgssapi_krb5.so.2,/usr/lib/amd64/gss/mech_krb5.so,/usr/lib/amd64/libgss.so">
<!-- Default time in seconds for using expired CRLs. -->
<!ENTITY default-use-expired-crls "0">
<!-- CRLs are not disabled by default. -->
<!ENTITY default-disable-crls "no">
<!-- Digital signature in key usage is not enforced by default. -->
<!ENTITY default-dod-pki "no">
<!-- LDAP server default port. -->
<!ENTITY default-ldap-server-port "389">
<!-- Default CRL update minimum interval. -->
<!ENTITY default-crl-update-min-interval "30">
<!-- Default interval for CRL prefetching. -->
<!ENTITY default-crl-prefetch-interval "3600">
<!-- Default crypto library mode ("fips" or "standard"). -->
<!ENTITY default-crypto-lib-mode "standard">
<!-- Both ipv4 and ipv6 are enabled by default -->
<!ENTITY default-address-family-type "inet">
<!-- Default terminate user started processes -->
<!ENTITY default-terminate-user-processes "no">
<!ENTITY default-allow-configuration "no">
<!-- Default log event facility. -->
<!ENTITY default-log-event-facility "normal">
<!-- Default log event severity. -->
<!ENTITY default-log-event-severity "notice">
<!ENTITY default-access-action "allow">
<!-- Default value for the feature -->
<!ENTITY default-load-control-enable "yes">
<!-- Default value for the feature -->
<!ENTITY default-white-list-size "1000">
<!-- Default ignore AIX rlogin setting. -->
<!ENTITY default-ignore-aix-rlogin "no">
<!-- Default ignore AIX login setting. -->
<!ENTITY default-ignore-aix-login "no">
<!-- Default record sessions without PTYs. -->
<!ENTITY default-record-ptyless-sessions "yes">
<!-- Default Windows logon type. -->
<!ENTITY default-windows-logon-type "interactive">
<!-- Default Windows terminal mode. -->
<!ENTITY default-windows-terminal-mode "console">
<!-- Default Ignore nisplus no permission error. -->
<!ENTITY default-ignore-nisplus-no-permission "no">
<!-- TCP keepalives are disabled by default. -->
<!ENTITY default-tcp-keepalive "no">
<!-- Whether a plugin is allowed to not initialize (due to e.g. -->
<!-- system configuration, missing shared libraries). -->
<!ENTITY default-allow-missing "no">
<!-- Default connection idle timeout in seconds. The value zero -->
<!-- disables idle timeout. -->
<!ENTITY default-idle-timeout "0">
<!-- Message of the day (MOTD) is printed on login by default. -->
<!ENTITY default-print-motd "yes">
<!-- Authentication file permissions are checked by default. -->
<!ENTITY default-strict-modes "yes">
<!-- Default authentication file permission mask bits (octal). -->
<!ENTITY default-mask-bits "022">
<!-- Service name used with PAM. -->
<!ENTITY default-pam-service-name "ssh-server-g3">
<!-- Whether to perform PAM Account and Session management when executing -->
<!-- commands, i.e. shells, subsystems and remote commands. -->
<!ENTITY default-pam-command-action "no">
<!-- Whether to bind x11 listeners to the localhost interface or to the -->
<!-- 'any' interface. If the x11 listener is bound to the 'any' interface -->
<!-- the SO_REUSEADDR socket option will not be set. -->
<!ENTITY default-x11-listen-address "localhost">
<!-- Whether to only use PAM to check if the user is allowed to login. -->
<!-- PAM can be used during authentication or via the -->
<!-- pam-calls-with-commands setting. If PAM is not used in either -->
<!-- authentication or with pam-calls-with-commands the normal system -->
<!-- checks will be used to determine whether the user is allowed to -->
<!-- login i.e. account is not locked etc. -->
<!ENTITY default-pam-account-checking-only "no">
<!-- Whether the server tries to resolve the client hostname during -->
<!-- connection setup -->
<!ENTITY default-resolve-client-hostname "yes">
<!-- Whether to suppress last login, password expiry, motd etc. messages -->
<!-- during login. -->
<!ENTITY default-quiet-login "no">
<!-- Default certificate cache size in MBs. -->
<!ENTITY default-cert-cache-size "300">
<!-- Default CRL size limit (in MB). -->
<!ENTITY default-max-crl-size "50">
<!-- The default maximum path length for certificate validation. -->
<!ENTITY default-max-path-length "10">
<!-- Default timeout for external searches (LDAP, HTTP, OCSP) (seconds). -->
<!ENTITY default-external-search-timeout "360">
<!-- Default limit of LDAP responses (MBs). -->
<!ENTITY default-max-ldap-response-length "50">
<!-- Default LDAP connection idle timeout in seconds. -->
<!ENTITY default-ldap-idle-timeout "30">
<!-- Whether to enable AIX LAM password change by default. -->
<!ENTITY default-aix-lam-password-change "no">
<!-- Keyboard-interactive RADIUS server default port. -->
<!ENTITY default-tunnel-mapper-timeout "15">
<!-- Windows administrator is able to request elevated privileges. -->
<!ENTITY default-allow-elevation "yes">
<!-- Policy elements. -->
<!-- The top-level element. -->
<!ELEMENT secsh-server (params?,connections?,authentication-methods?
,services?)>
<!-- Parameter element. Only "hostkey" and "listener" are allowed multiple -->
<!-- times. -->
<!ELEMENT params (crypto-lib|address-family|hostkey|listener|settings|domain-policy
|logging|limits|cert-validation
|pluggable-authentication-modules|protocol-parameters|password-cache|
load-control|password-change-rules)*>
<!-- Cryptographic library. -->
<!ELEMENT crypto-lib EMPTY>
<!ATTLIST crypto-lib
mode (fips|standard) "&default-crypto-lib-mode;">
<!-- address-family mode setting ipv4 & ipv6-->
<!ELEMENT address-family EMPTY>
<!ATTLIST address-family
type (any|inet|inet6) "&default-address-family-type;">
<!-- Settings - a block for stuff that is too minor to have its
own element in the params block. -->
<!ELEMENT settings EMPTY>
<!ATTLIST settings
signature-algorithms CDATA #IMPLIED
proxy-scheme CDATA #IMPLIED
xauth-path CDATA #IMPLIED
xauth-shell CDATA #IMPLIED
x11-listen-address (localhost|any)
"&default-x11-listen-address;"
pam-account-checking-only (yes|no)
"&default-pam-account-checking-only;"
ignore-aix-rlogin (yes|no) "&default-ignore-aix-rlogin;"
ignore-aix-login (yes|no) "&default-ignore-aix-login;"
record-ptyless-sessions (yes|no) "&default-record-ptyless-sessions;"
user-config-dir CDATA #IMPLIED
default-path CDATA #IMPLIED
windows-logon-type (batch|interactive|network|network-cleartext)
"&default-windows-logon-type;"
windows-terminal-mode (console|stream)
"&default-windows-terminal-mode;"
ignore-nisplus-no-permission (yes|no)
"&default-ignore-nisplus-no-permission;"
resolve-client-hostname (yes|no) "&default-resolve-client-hostname;"
quiet-login (yes|no) "&default-quiet-login;"
default-domain CDATA #IMPLIED
terminate-user-processes (yes|no) "&default-terminate-user-processes;"
allow-elevation (yes|no) "&default-allow-elevation;">
<!ELEMENT pluggable-authentication-modules EMPTY>
<!ATTLIST pluggable-authentication-modules
service-name CDATA "&default-pam-service-name;"
dll-path CDATA #IMPLIED
pam-calls-with-commands (yes|no|forced-no)
"&default-pam-command-action;">
<!ELEMENT protocol-parameters EMPTY>
<!ATTLIST protocol-parameters
threads CDATA #IMPLIED>
<!-- Hostkey specification. -->
<!ELEMENT hostkey (((private,(public|x509-certificate|
openssh-certificate)?)
|externalkey)|x509-certificate-chain|
certificate-authority)*>
<!ATTLIST hostkey
status CDATA #IMPLIED
advertise CDATA #IMPLIED
rotation-period CDATA #IMPLIED
rotation-margin CDATA #IMPLIED>
<!-- Private key specification. -->
<!ELEMENT private (#PCDATA)>
<!ATTLIST private
file CDATA #IMPLIED
passphrase CDATA #IMPLIED
passphrase-file CDATA #IMPLIED
passphrase-format CDATA #IMPLIED>
<!-- Public key. -->
<!ELEMENT public (#PCDATA)>
<!ATTLIST public
file CDATA #IMPLIED>
<!-- Certificate (host). -->
<!ELEMENT x509-certificate (#PCDATA)>
<!ATTLIST x509-certificate
file CDATA #IMPLIED>
<!ELEMENT x509-certificate-chain (x509-certificate)*>
<!ELEMENT openssh-certificate (#PCDATA)>
<!ATTLIST openssh-certificate
file CDATA #IMPLIED>
<!-- External key. -->
<!ELEMENT externalkey EMPTY>
<!ATTLIST externalkey
type CDATA #REQUIRED
init-info CDATA #IMPLIED>
<!ELEMENT certificate-authority (ca-external-command*)>
<!ATTLIST certificate-authority
type CDATA #IMPLIED
name CDATA #IMPLIED
max-validity-period CDATA #IMPLIED
log-file CDATA #IMPLIED
revocation-file CDATA #IMPLIED>
<!ELEMENT ca-external-command EMPTY>
<!ATTLIST ca-external-command
type CDATA #IMPLIED
command CDATA #IMPLIED
args CDATA #IMPLIED>
<!-- CA certificate. -->
<!ELEMENT ca-certificate (#PCDATA)>
<!ATTLIST ca-certificate
file CDATA #IMPLIED
name CDATA #REQUIRED
disable-crls (yes|no) "&default-disable-crls;"
use-expired-crls CDATA "&default-use-expired-crls;"
trusted (yes|no) "yes">
<!-- OpenSSH CA key. -->
<!ELEMENT openssh-ca-key (#PCDATA)>
<!ATTLIST openssh-ca-key
file CDATA #IMPLIED
name CDATA #REQUIRED>
<!-- Certificate caching. -->
<!ELEMENT cert-cache-file EMPTY>
<!ATTLIST cert-cache-file
file CDATA #REQUIRED>
<!-- CRL automatic updating. -->
<!ELEMENT crl-auto-update EMPTY>
<!ATTLIST crl-auto-update
update-before CDATA #IMPLIED
minimum-interval CDATA "&default-crl-update-min-interval;">
<!-- CRL prefetch. -->
<!ELEMENT crl-prefetch EMPTY>
<!ATTLIST crl-prefetch
interval CDATA "&default-crl-prefetch-interval;"
url CDATA #REQUIRED>
<!-- LDAP server. -->
<!ELEMENT ldap-server EMPTY>
<!ATTLIST ldap-server
address CDATA #REQUIRED
port CDATA "&default-ldap-server-port;">
<!-- OCSP responder. -->
<!ELEMENT ocsp-responder (#PCDATA)>
<!ATTLIST ocsp-responder
validity-period CDATA #IMPLIED
url CDATA #REQUIRED
certificate CDATA #IMPLIED>
<!-- Enforce digital signature in key usage. -->
<!ELEMENT dod-pki EMPTY>
<!ATTLIST dod-pki
enable (yes|no) "&default-dod-pki;">
<!-- Secure Shell server TCP listener address and port. -->
<!ELEMENT listener EMPTY>
<!ATTLIST listener
id ID #REQUIRED
port CDATA "22"
address CDATA #IMPLIED>
<!-- Server domain policy type -->
<!ELEMENT domain-policy (windows-domain)*>
<!ATTLIST domain-policy
windows-domain-precedence CDATA #IMPLIED>
<!ELEMENT windows-domain EMPTY>
<!ATTLIST windows-domain
name CDATA #REQUIRED
user CDATA #REQUIRED>
<!ELEMENT password-cache EMPTY>
<!ATTLIST password-cache
file CDATA #REQUIRED>
<!-- Logging. -->
<!ELEMENT logging (log-events*)>
<!-- Log events. -->
<!ELEMENT log-events (#PCDATA)>
<!ATTLIST log-events
facility (normal|daemon|user|auth|local0|local1
|local2|local3|local4|local5|local6|local7|discard)
"&default-log-event-facility;"
severity (informational|notice|warning|error|critical
|security-success|security-failure)
"&default-log-event-severity;">
<!-- Certificate validation. Maximum one of each of "cert-cache-file", -->
<!-- "crl-auto-update" and "dod-pki" can be present. -->
<!ELEMENT cert-validation (ldap-server|ocsp-responder|cert-cache-file
|crl-auto-update|crl-prefetch|dod-pki
|ca-certificate|openssh-ca-key)*>
<!ATTLIST cert-validation
http-proxy-url CDATA #IMPLIED
socks-server-url CDATA #IMPLIED
cache-size CDATA "&default-cert-cache-size;"
max-crl-size CDATA "&default-max-crl-size;"
external-search-timeout CDATA "&default-external-search-timeout;"
max-ldap-response-length CDATA "&default-max-ldap-response-length;"
ldap-idle-timeout CDATA "&default-ldap-idle-timeout;"
max-path-length CDATA "&default-max-path-length;">
<!ELEMENT access EMPTY>
<!ATTLIST access
user CDATA #REQUIRED
action (allow|deny) "&default-access-action;">
<!-- Limits. -->
<!-- max-connections is _per_servant_ .-->
<!-- servant-lifetime - how many connections a servant will handle -->
<!-- before it is retired. -->
<!ELEMENT limits (servant-lifetime)*>
<!ATTLIST limits
max-connections CDATA #IMPLIED
max-processes CDATA #IMPLIED>
<!ELEMENT servant-lifetime EMPTY>
<!ATTLIST servant-lifetime
total-connections CDATA #IMPLIED>
<!ELEMENT load-control EMPTY>
<!ATTLIST load-control
enable (yes|no) "&default-load-control-enable;"
discard-limit CDATA #IMPLIED
white-list-size CDATA "&default-white-list-size;">
<!-- This element is deprecated and included for backwards compatibility only -->
<!ELEMENT password-change-rules EMPTY>
<!ATTLIST password-change-rules
allow-configuration (yes|no) "&default-allow-configuration;">
<!-- Connections. -->
<!ELEMENT connections (connection+)>
<!-- Connection. -->
<!ELEMENT connection (selector*,rekey?,cipher*,mac*,kex*,hostkey-algorithm*,compression*)>
<!ATTLIST connection
name ID #IMPLIED
action (allow|deny) "&default-connection-action;"
tcp-keepalive (yes|no) "&default-tcp-keepalive;">
<!-- Rekey intervals. -->
<!ELEMENT rekey EMPTY>
<!ATTLIST rekey
seconds CDATA "&default-rekey-interval-seconds;"
bytes CDATA "&default-rekey-interval-bytes;">
<!-- Cipher. -->
<!ELEMENT cipher EMPTY>
<!ATTLIST cipher
name CDATA #REQUIRED
allow-missing (yes|no) "&default-allow-missing;">
<!-- MAC. -->
<!ELEMENT mac EMPTY>
<!ATTLIST mac
name CDATA #REQUIRED
allow-missing (yes|no) "&default-allow-missing;">
<!-- KEX. -->
<!ELEMENT kex EMPTY>
<!ATTLIST kex
name CDATA #REQUIRED
allow-missing (yes|no) "&default-allow-missing;">
<!-- Hostkey algorithm. -->
<!ELEMENT hostkey-algorithm EMPTY>
<!ATTLIST hostkey-algorithm
name CDATA #REQUIRED
allow-missing (yes|no) "&default-allow-missing;">
<!-- Compression. -->
<!ELEMENT compression EMPTY>
<!ATTLIST compression
name CDATA #IMPLIED>
<!-- Selector element. -->
<!ELEMENT selector (interface|certificate|host-certificate|ip
|user|user-group|user-privileged|blackboard
|publickey-passed|user-password-change-needed)*>
<!-- Interface selector. At least one parameter must be given. If id is -->
<!-- set, the others MUST NOT be set. If id is not set, either or both -->
<!-- of address and port may be defined. -->
<!ELEMENT interface EMPTY>
<!ATTLIST interface
id IDREF #IMPLIED
address CDATA #IMPLIED
port CDATA #IMPLIED
allow-undefined (yes|no) "&default-allow-undefined-value;">
<!-- Public key (plain) passed selector. -->
<!ELEMENT publickey-passed EMPTY>
<!ATTLIST publickey-passed
type CDATA #IMPLIED
length CDATA #IMPLIED
allow-undefined (yes|no)
"&default-allow-undefined-value;">
<!-- Certificate selector. -->
<!ELEMENT certificate EMPTY>
<!ATTLIST certificate
field (ca-list|issuer-name|subject-name|serial-number
|altname-email|altname-upn
|altname-ip|altname-fqdn
|extended-key-usage
|openssh-principals|openssh-cert-type
|openssh-extension|openssh-key-id) #REQUIRED
pattern CDATA #IMPLIED
pattern-case-sensitive CDATA #IMPLIED
regexp CDATA #IMPLIED
ignore-prefix (yes|no) #IMPLIED
ignore-suffix (yes|no) #IMPLIED
explicit (yes|no) #IMPLIED
allow-undefined (yes|no)
"&default-allow-undefined-value;">
<!-- Host certificate selector. -->
<!ELEMENT host-certificate EMPTY>
<!ATTLIST host-certificate
field (ca-list|issuer-name|subject-name|serial-number
|altname-email|altname-upn
|altname-ip|altname-fqdn
|extended-key-usage
|openssh-principals|openssh-cert-type
|openssh-extension|openssh-key-id) #REQUIRED
pattern CDATA #IMPLIED
pattern-case-sensitive CDATA #IMPLIED
regexp CDATA #IMPLIED
ignore-prefix (yes|no) #IMPLIED
ignore-suffix (yes|no) #IMPLIED
explicit (yes|no) #IMPLIED
allow-undefined (yes|no)
"&default-allow-undefined-value;">
<!-- IP address selector. -->
<!-- The address will be one of the following: -->
<!-- - an IP range of the form x.x.x.x-y.y.y.y -->
<!-- - an IP mask of the form x.x.x.x/y -->
<!-- - a straight IP address x.x.x.x -->
<!-- - an FQDN pattern (form not checked, either it matches or not) -->
<!-- Exactly one of address or fqdn must be set. -->
<!ELEMENT ip EMPTY>
<!ATTLIST ip
address CDATA #IMPLIED
fqdn CDATA #IMPLIED
fqdn-regexp CDATA #IMPLIED
allow-undefined (yes|no)
"&default-allow-undefined-value;">
<!-- User name selector. -->
<!ELEMENT user EMPTY>
<!ATTLIST user
name CDATA #IMPLIED
name-case-sensitive CDATA #IMPLIED
name-regexp CDATA #IMPLIED
id CDATA #IMPLIED
allow-undefined (yes|no)
"&default-allow-undefined-value;">
<!-- User group selector. -->
<!ELEMENT user-group EMPTY>
<!ATTLIST user-group
name CDATA #IMPLIED
name-case-sensitive CDATA #IMPLIED
name-regexp CDATA #IMPLIED
id CDATA #IMPLIED
allow-undefined (yes|no)
"&default-allow-undefined-value;">
<!-- User privileged (administrator) selector. -->
<!ELEMENT user-privileged EMPTY>
<!ATTLIST user-privileged
value (yes|no)
"&default-user-privileged-value;"
allow-undefined (yes|no)
"&default-allow-undefined-value;">
<!-- Selector for the need of user password change. -->
<!ELEMENT user-password-change-needed EMPTY>
<!ATTLIST user-password-change-needed
value (yes|no)
"&default-user-password-change-needed-value;"
allow-undefined (yes|no)
"&default-allow-undefined-value;">
<!-- Blackboard selector. -->
<!ELEMENT blackboard EMPTY>
<!ATTLIST blackboard
field CDATA #REQUIRED
pattern CDATA #IMPLIED
pattern-case-sensitive CDATA #IMPLIED
regexp CDATA #IMPLIED
allow-undefined (yes|no)
"&default-allow-undefined-value;">
<!-- Authentication methods element. -->
<!ELEMENT authentication-methods (banner-message?,auth-file-modes?
,authentication*)>
<!ATTLIST authentication-methods
login-grace-time CDATA "&default-login-grace-time-seconds;">
<!-- Banner message element. -->
<!ELEMENT banner-message (#PCDATA)>
<!ATTLIST banner-message
file CDATA #IMPLIED>
<!-- Authentication file permission checks. -->
<!ELEMENT auth-file-modes EMPTY>
<!ATTLIST auth-file-modes
strict (yes|no) "&default-strict-modes;"
mask-bits CDATA "&default-mask-bits;"
dir-mask-bits CDATA #IMPLIED>
<!-- Authentication element. In an authentication element, different -->
<!-- authentication methods are in OR-relation. User must pass one of -->
<!-- them. -->
<!ELEMENT authentication (selector*
,(set-blackboard|login-restrictions)*
,(auth-publickey|auth-hostbased|auth-password
|auth-keyboard-interactive|auth-gssapi)*
,mapper?
,set-user?
,authentication*)>
<!ATTLIST authentication
name ID #IMPLIED
action (allow|deny) "&default-authentication-action;"
set-group CDATA #IMPLIED
repeat-block (yes|no) "no"
password-cache (yes|no) "&default-password-cache;" >
<!ELEMENT set-user EMPTY>
<!ATTLIST set-user
name CDATA #REQUIRED>
<!ELEMENT mapper EMPTY>
<!ATTLIST mapper
command CDATA #REQUIRED
timeout CDATA "&default-tunnel-mapper-timeout;"
chroot CDATA #IMPLIED
user CDATA #IMPLIED >
<!ELEMENT login-restrictions EMPTY>
<!ATTLIST login-restrictions
ignore-password-expiration CDATA #IMPLIED
ignore-aix-rlogin CDATA #IMPLIED
ignore-aix-login CDATA #IMPLIED
ignore-nisplus-no-permission CDATA #IMPLIED>
<!ELEMENT set-blackboard (#PCDATA)>
<!ATTLIST set-blackboard
field CDATA #REQUIRED
value CDATA #IMPLIED
file CDATA #IMPLIED>
<!-- Public-key authentication. -->
<!ELEMENT auth-publickey EMPTY>
<!ATTLIST auth-publickey
require-dns-match (yes|no)
"&default-auth-publickey-require-dns-match;"
signature-algorithms CDATA #IMPLIED
authorization-file CDATA #IMPLIED
authorized-keys-directory CDATA #IMPLIED
openssh-authorized-keys-file CDATA #IMPLIED
allow-missing (yes|no)
"&default-allow-missing;">
<!-- Host-based authentication. -->
<!ELEMENT auth-hostbased EMPTY>
<!ATTLIST auth-hostbased
require-dns-match (yes|no)
"&default-auth-hostbased-require-dns-match;"
disable-authorization (yes|no) "no"
allow-missing (yes|no)
"&default-allow-missing;">
<!-- Password authentication. -->
<!ELEMENT auth-password EMPTY>
<!ATTLIST auth-password
failure-delay CDATA "&default-auth-password-failure-delay;"
max-tries CDATA "&default-auth-password-max-tries;"
use-pam (yes|no) #IMPLIED
allow-missing (yes|no) "&default-allow-missing;" >
<!-- Keyboard-interactive authentication. -->
<!ELEMENT auth-keyboard-interactive ((submethod-pam
|submethod-password
|submethod-securid
|submethod-radius
|submethod-aix-lam
|submethod-generic)*)>
<!ATTLIST auth-keyboard-interactive
failure-delay CDATA "&default-auth-kbdint-failure-delay;"
max-tries CDATA "&default-auth-kbdint-max-tries;"
allow-missing (yes|no) "&default-allow-missing;" >
<!-- Keyboard-interactive submethods. -->
<!-- PAM. service-name is #IMPLIED, as it will be by default whatever is -->
<!-- set in "params" block. -->
<!ELEMENT submethod-pam EMPTY>
<!ATTLIST submethod-pam
service-name CDATA #IMPLIED
dll-path CDATA #IMPLIED
allow-missing (yes|no) #IMPLIED>
<!-- Password. -->
<!ELEMENT submethod-password EMPTY>
<!ATTLIST submethod-password
allow-missing (yes|no) #IMPLIED>
<!-- SecurID. -->
<!ELEMENT submethod-securid EMPTY>
<!ATTLIST submethod-securid
dll-path CDATA #IMPLIED
allow-missing (yes|no) #IMPLIED>
<!-- RADIUS. -->
<!ELEMENT submethod-radius (radius-server+)>
<!ATTLIST submethod-radius
allow-missing (yes|no) #IMPLIED>
<!-- RADIUS server. -->
<!ELEMENT radius-server (radius-shared-secret)>
<!ATTLIST radius-server
address CDATA #REQUIRED
port CDATA "&default-radius-server-port;"
timeout CDATA "&default-radius-server-timeout;"
client-nas-identifier CDATA #IMPLIED>
<!-- Secret. "file" has precedence over #PCDATA. -->
<!ELEMENT radius-shared-secret (#PCDATA)>
<!ATTLIST radius-shared-secret
file CDATA #IMPLIED>
<!-- AIX LAM. -->
<!ELEMENT submethod-aix-lam EMPTY>
<!ATTLIST submethod-aix-lam
enable-password-change (yes|no) "&default-aix-lam-password-change;"
allow-missing (yes|no) #IMPLIED>
<!-- Generic submethod. -->
<!ELEMENT submethod-generic EMPTY>
<!ATTLIST submethod-generic
name CDATA #REQUIRED
params CDATA #IMPLIED
allow-missing (yes|no) #IMPLIED>
<!-- GSSAPI authentication. -->
<!ELEMENT auth-gssapi EMPTY>
<!ATTLIST auth-gssapi
dll-path CDATA "&default-gssapi-dll-path;"
allow-ticket-forwarding (yes|no)
"&default-gssapi-ticket-forwarding-policy;"
allow-missing (yes|no)
"&default-allow-missing;">
<!-- Services element. -->
<!ELEMENT services (group*,rule+)>
<!-- Group element. -->
<!ELEMENT group (selector+)>
<!ATTLIST group
name ID #REQUIRED>
<!-- Rule element. Maximum one of each of "terminal", "tunnel-agent" -->
<!-- or "tunnel-x11" can be present. -->
<!ELEMENT rule (environment|terminal|subsystem|command
|tunnel-agent|tunnel-x11|tunnel-local
|tunnel-remote)*>
<!-- "group", if defined, will be used to match the rule. -->
<!ATTLIST rule
group CDATA #IMPLIED
idle-timeout CDATA "&default-idle-timeout;"
print-motd (yes|no) "&default-print-motd;">
<!-- Environment. -->
<!-- The default allowed environment variables are: -->
<!-- allowed-case-sensitive="TERM,PATH,TZ,LANG,LC_*" -->
<!-- If neither allowed nor allowed-case-sensitive is set, -->
<!-- the default is used. -->
<!ELEMENT environment EMPTY>
<!ATTLIST environment
allowed CDATA #IMPLIED
allowed-case-sensitive CDATA #IMPLIED>
<!-- Terminal. -->
<!ELEMENT terminal EMPTY>
<!ATTLIST terminal
action (allow|deny) "&default-terminal-action;"
chroot CDATA #IMPLIED>
<!-- Subsystem. -->
<!ELEMENT subsystem (attribute*)>
<!ATTLIST subsystem
type CDATA #REQUIRED
action (allow|deny) "&default-subsystem-action;"
audit (yes|no) "&default-subsystem-audit;"
exec-directly CDATA #IMPLIED
application CDATA #IMPLIED
chroot CDATA #IMPLIED
pass-bb (yes|no) "no">
<!ELEMENT attribute EMPTY>
<!ATTLIST attribute
name CDATA #REQUIRED
value CDATA #IMPLIED>
<!-- Tunnels. -->
<!ELEMENT tunnel-x11 EMPTY>
<!ATTLIST tunnel-x11
action (allow|deny) "&default-tunnel-action;">
<!ELEMENT tunnel-agent EMPTY>
<!ATTLIST tunnel-agent
action (allow|deny) "&default-tunnel-action;">
<!ELEMENT tunnel-local (mapper|((src|tunnel-src|dst)*))>
<!ATTLIST tunnel-local
action (allow|deny) "&default-tunnel-action;">
<!ELEMENT tunnel-remote ((src|tunnel-dst|listen)*)>
<!ATTLIST tunnel-remote
action (allow|deny) "&default-tunnel-action;"
disable-privilege-check (yes|no) "no">
<!-- Tunnel selectors. These apply only to TCP local and remote tunnels.-->
<!-- src and dst are for local-tcp -->
<!-- src and listen are for remote-tcp -->
<!-- address or fqdn are not mandatory. If set, exactly one must be set -->
<!-- (not both). -->
<!-- Source. -->
<!ELEMENT src EMPTY>
<!ATTLIST src
address CDATA #IMPLIED
fqdn CDATA #IMPLIED
fqdn-regexp CDATA #IMPLIED
port CDATA #IMPLIED>
<!-- Destination. -->
<!ELEMENT dst EMPTY>
<!ATTLIST dst
address CDATA #IMPLIED
fqdn CDATA #IMPLIED
fqdn-regexp CDATA #IMPLIED
port CDATA #IMPLIED>
<!-- Listener. -->
<!ELEMENT listen EMPTY>
<!ATTLIST listen
address CDATA #IMPLIED
port CDATA #IMPLIED>
<!-- Tunnel source. -->
<!ELEMENT tunnel-src EMPTY>
<!ATTLIST tunnel-src
address CDATA #IMPLIED
fqdn CDATA #IMPLIED
fqdn-regexp CDATA #IMPLIED>
<!ELEMENT tunnel-dst EMPTY>
<!ATTLIST tunnel-dst
address CDATA #IMPLIED
fqdn CDATA #IMPLIED
fqdn-regexp CDATA #IMPLIED>
<!-- Command. -->
<!ELEMENT command EMPTY>
<!ATTLIST command
action (allow|deny|forced)
"&default-command-action;"
interactive (yes|no)
"&default-interactive-command-action;"
application CDATA #IMPLIED
application-case-sensitive CDATA #IMPLIED
chroot CDATA #IMPLIED>
2023 SSH Communications Security Corporation