ssh-server-ctl

Synopsis

ssh-server-ctl [options] [command [command-options]]

Description

ssh-server-ctl (ssh-server-ctl.exe on Windows) is a control utility that can be used to start, stop, or reload the configuration of Tectia Server (ssh-server-g3). It can also be used to add new servants or to stop servants, to check the status of the server and to pause the server. Furthermore, on Windows it can be used for password cache management.

	Note
	ssh-server-ctl (ssh-server-ctl.exe on Windows) must be run as a privileged user (root or administrator).

Options

The following options are available:

-C, --current: Connects to the current server.
-D, --debug=LEVEL: Defines the debug level.
-h, --help: Displays the help text for the command.
-l, --listen=PORT: Same as the port option.
-O, --old: Connects to the backup listener.
-P, --pid PID: Targets the command to the ssh-server-g3 process identified with the given PID. Available on Unix only.
-p, --port PORT: Targets the command to the ssh-server-g3 process running on the given PORT. The default port 22 is assumed if this option is not used.
--server-address: The path to the server control socket.
-q, --quiet: Displays little or no output depending on the command.
-s, --short: Displays a shorter more machine readable output.
-v, --verbose: Displays more information if it is available.
-V, --version: Displays the version string.

Commands

ssh-server-ctl (ssh-server-ctl.exe on Windows) accepts the following commands:

add-servant

Start a new servant or new servants.

Options:

num: Defines the number of servants to be started.

continue

Continue a previously paused service.

pause

Pause the service. Existing connections continue to function, but new connections will not be accepted until the continue command has been given.

pid

Prints the server process ID.

reload

Causes the server process to reload its configuration. The configuration is read from the ssh-server-config.xml file. Existing connections stay open using the old configuration and the new connections will use the new configuration.

start

Attempts to start the server process by executing ssh-server-g3.

The start command will check if there is a server process currently running; if yes, the tool will report the case and will not make any starting attempts.

Options:

-p, --port PORT: Start the server on an alternate port (the default port is 22).
-f, --config-file FILE: Uses the given file as a configuration.

status

When the server is running, this command outputs the following information:

Server status and process ID
Date and time of starting the server
Cryptographic mode
Address family type
Path to the server control socket
Number of successful reconfigurations
Date and time of the last reconfiguration (if applicable)
Number of connections received
Number of servants
Preferred number of servants
Maximum number of servants
Maximum number of connections per servant
Total number of connections after which servants are retired
Status of load control (enabled/disabled)
Maximum size for the server's white list
Discard limit for the server's white list
Additionally, for each servant:
- Process ID
- Status
- Number of connections, unauthenticated connections, and channels
- All-time total number of connections

stop

Causes the server process to start shutting down. The stop command checks if there is a server process currently running; if not, the tool will report the case and will not make any stopping attempts.

On AIX, if an error occurs when the server is stopped by using ssh-server-ctl stop, it falls back to stop the server process directly.

Options:

-F, --force: Forcefully disconnects connections to shut down the server quicker. The force option should be given with the initial stop command.

stop-servant id ...

Causes the server to stop servants specified by their ID numbers. You can use a space-separated list to enter several IDs.

view-white-list

Prints the IP addresses on the server's white list in reverse chronological order. The white list is a list of IP addresses of connections that have recently had a successful authentication. (For more information, see load-control in ssh-server-config(5).)

The following commands related to password cache management are supported on Windows only:

add-pwd-cache-user username

(Windows only) Adds the specified user and entered password to the server password cache database. If the user already exists, the existing password gets replaced with the new one. The password is read from the console or standard input.

del-pwd-cache-user username

(Windows only) Removes the specified user's password from the currently active server password cache. The command will report an error if the specified user is not present in the password cache.

export-pwd-cache [--password] FILE

(Windows only) Exports the current password database into an external encrypted FILE. If FILE already exists, the export will fail (no files will be overwritten). FILE must reside on a local drive.

The password that will be used to protect the password database FILE will be requested interactively, unless it is provided as a command-line argument (with the --password option).

Options:

--password= PASSWORD | file://PASSWORDFILE | env://VARIABLE | extprog://PROGRAM

Sets the user password. It is possible to give the PASSWORD directly as an argument to this option or through an environment VARIABLE, but these options are not recommended. Better alternatives are entering a path to a file on a local drive that contains the password (--password=file://PASSWORDFILE), or entering a path to an external program or script that outputs the password (--password=extprog://PROGRAM).

	Caution
	Supplying the password on the command line or setting it as an environment variable are not secure options. For example, in a multiuser environment, the password given directly on the command line is trivial to recover from the process table.

	Note
	If you use a `PASSWORDFILE`, make sure that its permissions are set so that only the owner of the file has access to it. Note also that the export operation is run within the account in which the Server is running (System) - not within the account that is used to run ssh-server-ctl.

Tectia enforces the use of strong passwords for the password cache export and import functions. Instead of explicit password requirements, we use a "password class" system. For example, a password that consists of eight unique characters from three different character classes or a password of eleven unique characters from two character classes are deemed strong enough. The character classes are: digits, lower-case letters, upper-case letters, and other characters. When calculating the number of different character classes, upper-case letters used as the first character and digits used as the last character of a password are ignored.

import-pwd-cache [--password] FILE

(Windows only) Imports a previously exported password database from an external encrypted FILE. The external password database FILE must reside on a local drive. All entries from FILE will be added or overwritten into the current password cache database that is in use by the server. The password that is protecting the FILE will be requested interactively, unless it is provided as a command-line argument (with the --password option).

	Caution
	The passwords of user names that already exist in the current password cache will be overwritten by those in the imported password database `FILE`.

Options are the same as for export-pwd-cache.

show-pwd-cache-users

(Windows only) Displays all stored user names from the currently active server password cache. The passwords are not displayed, only the user names.